![]() After powering on the aircraft and remote controller, follow the on-screen prompts to activate the device using DJI Fly. ![]() If you would like to install or remove the battery from the drone, please see below:ĭJI Mini 3 requires activation before first use. Note that the battery can be charged without being removed from the drone. To learn more about how to replace the propellers, check the video: Step 3: Tighten the propellers without a mark onto the remaining motors. Step 2: Tighten the propellers with a mark onto the motors using the provided screwdriver. Step 1: Place the drone horizontally and make sure that the drone’s camera faces forwards If the propeller is mounted in an improper way, the drone cannot take off. In case of a propeller replacement, please refer to the steps below. Before mounting the propeller, better confirm the mark on each first.ĭJI Mini 3 has been installed with propellers before leaving the factory. Refer to the table below for more information about the aircraft status indicators.Īs we all know, there are two types of propeller/motor: CW and CCW, and you can easily recognize it through the mark on it. ![]() Different color indicates different status of the aircraft, and the blinking frequency as well. You can tell the status of your device through the blinking patterns of the aircraft status indicator. Press and hold the power button on the aircraft or remote controller to power on or off the device. In the same way, snap the lower buckle into the slot at the bottom of the aircraft. Snap the buckle at the upper part of the gimbal protector into the slot on the aircraft.Ģ. Push the lower buckle of the gimbal protector towards the camera to remove the gimbal protector.ġ. * If the drone is powered on without activation, the gimbal will not vibrate and run self-check.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |